I cannot remember how many times I fitted the door whilst attached to the hinge repair, but it must have been a lot. I took my starting point from the top part of the repair against the original A-post as you can hopefully see from the second photo. I then made sure the repair was vertical and tacked a couple of small welds to hold it in place, then test fitted the door again to make sure all was lining up as it should and finished welding it in.
This left a small custom repair job that took no time at all to sort out. I do love making these.
I had to fix another rust patch around the windscreen support hole which also turned out very nice.
This now only leaves the outer skin of the A-post to fit and if the test fitting is anything to go by we are looking ok to crack on with it.
There is some adapting to do to get the line correct on the top left of the repair to ensure the gap is consistent, but I am confident it will work out.
So looking forward to finishing this front side.