Continued to make more progress on the bump stop plate, but it was slow. Having to make a bespoke repair for the bracket that exactly matched the multiple curves wasn't easy.
But eventually got there and welded it in place.
Next stop weld in the bump stop. More welding upside down! Hmm, Can't wait!
Whilst the car is on its side and the floor is in place I need to put back the plate that the rubber bump stop on the suspension is designed to hit.
Both of them were very dirty and a little bit rusty, so I set about to clean them up with my assortment of wire brushes.
They came up quite good and certainly good enough for another few years. They just needed some protection so I coated them in a couple of layers of rust converter.
I'll paint the insides with chassis black paint before welding them back on.
The only trouble real I had was that in order to attach these to the floor you need this bracket and one of them was totally destroyed by rust.
This one will be ok once cleaned up but I need to make a new one.
Made some further progress this weekend on the boot floor by welding in the left hand side extension panel.
Even with just one of these in it makes the whole floor look more complete.
I also finished welding the rear edge of the floor panel which (with a bit of filler) is looking good as well.