Had a really good evenings work as have welded in the spring hanger to the rear bulkhead. Had to make sure this went in perfectly, so was taking measurement after measurement and then measuring again.
Hi Chris, Thanks for reading my blog, I hope helps you with your project. Please feel free to ask if you need any advice. I'll add your blog to the list! Good Luck James
Really enjoyed reading your blog. I have just started my own project....restoring an MG Midget shell. www.1970mgmidget.blogspot.co.uk
ReplyDeleteI will also be teaching myself to weld when the time comes! :)
Hi Chris,
ReplyDeleteThanks for reading my blog, I hope helps you with your project. Please feel free to ask if you need any advice.
I'll add your blog to the list!
Good Luck
James