I made the decision to make a 80cms strip that would be welded in place after cutting out the rusted area. I will make separate repairs for each section under the rear lights housing later on.
I really enjoy shaping the metal to fit.
Monday, 7 August 2017
Lower Rear Panel Repair
I started to create a custom repair for the rear panel. After cleaning all the old paint and filler I measured and the rust was 99% contained within a 5cms width gap.
I made the decision to make a 80cms strip that would be welded in place after cutting out the rusted area. I will make separate repairs for each section under the rear lights housing later on.
I made the decision to make a 80cms strip that would be welded in place after cutting out the rusted area. I will make separate repairs for each section under the rear lights housing later on.
No comments:
Post a Comment